Solid Control Drilling Waste Management Market Size - By Application, Growth Forecast, 2026 - 2035

Solid Control Drilling Waste Management Market Size

According to a recent study by Global Market Insights Inc., the solid control drilling waste management market was estimated at USD 1.4 billion in 2025. The market is expected to grow from USD 1.5 billion in 2026 to USD 3.1 billion in 2035, at a CAGR of 7.8%.

• Tightening waste and emissions rules are pushing operators to invest earlier in solids control, thereby closing loopholes around venting, flaring, leak detection, and waste handling. That pressure flows back to the rig site, where better solids control and cuttings handling reduce volumes that later need treatment or disposal, and demonstrate compliance when auditors arrive.
   
• Increasing climatic concerns along with measurement, recordkeeping, and LDAR programs are creating operational discipline that favors integrated waste solutions. For service companies, the outcome is rising demand for equipment that captures, separates, and documents waste streams in real time, cutting disposal mileage and proving performance under stricter permits.
   
• For illustration, in March 2024, the U.S. Department of the Interior/BLM finalized a rule to curb waste of natural gas on federal and Tribal lands, modernizing decades-old requirements and mandating measures to avoid wasteful practices and fix leaks, directly affecting drilling operations and onsite waste control.
   
• State-level overhauls are modernizing oilfield waste facility rules, thereby expanding tracking and groundwater protection is resulting in know how waste facilities are designed, operated, monitored, and closed. The practical effect is tighter acceptance criteria for drill cuttings and muds, more emphasis on transport data capture, and longer windows for public scrutiny.
   
• For solids control teams, which translates into more upstream separation to reduce what leaves the pad, and stronger documentation for every skip or container. These rewrites codify guidance already in use, creating a level playing field and raising the floor for service quality.
   
• For instance, in August 2024, the Texas Railroad Commission proposed its first substantial overhaul of waste management rules in 40 years, highlighting groundwater protection, facility design/operation standards, enhanced tracking of transported oilfield waste, and extended protest timelines.
   
• Continuous & exponential rising offshore safety and environmental compliance is further adding to zero or near-zero discharge handling across the globe. Offshore regulators emphasize prevention and containment—pushing operators toward enclosed cuttings systems, onboard treatment, and engineered reinjection that avoid overboard discharges.
   
• The compliance culture built after major incidents persists, with inspection checklists, standards incorporation, and notices to lessees aligning industry practice. Practically, offshore solids control has become a specialized discipline, where enclosed conveying, dryers, centrifuges, and monitored storage that meet permit conditions and reduce crane lifts and personnel exposure.
   
• For reference, during 2023 – 2024, the U.S. Bureau of Safety and Environmental Enforcement (BSEE) maintains and updates offshore rules, standards, and PINC checklists reinforcing post-Deepwater Horizon safeguards and ongoing compliance expectations across the Outer Continental Shelf.
   

Solid Control Drilling Waste Management Market Trends

• OSPAR-area rules and decommissioning realities are driving advanced cuttings management and monitoring. In the North Sea and broader OSPAR maritime area, decades of measures have reduced discharges and phased out hazardous chemicals. As decommissioning accelerates, operators must plan for cuttings piles, assess disturbance impacts, and favor options that minimize seabed effects.
   
• This has strengthened the market for proven solids control, onboard treatment, and risk-based strategies that minimize residual contamination and document outcomes for regulators. Vendors that can support both operations and decom projects see durable demand for analytics, monitoring, and remediation-ready solutions.
   
• For instance, in 2023, The OSPAR Commission published its Offshore Industry Thematic Assessment, highlighting reduced discharges, phased-out hazardous fluids, and strict controls on decommissioning; alongside an assessment of drill cuttings disturbance with quantified volumes likely to be affected during removals.
   
• Rising effluent and discharge guidelines continue to anchor permit conditions, reinforcing solids control at the source, which in turn is bolstering the market growth. EPA’s Oil & Gas Extraction Effluent Guidelines establish the backbone for NPDES permitting across onshore, coastal, and offshore subcategories.
   
• These rules are resulting in minimizing pollutants, managing produced water and sand, and separating solids effectively. In addition, operators reduce mud contamination & recover fluids, as every gallon of avoidable waste complicates permitting and increases disposal cost. The enduring presence of these federal standards sustains investment in shakers, dryers, centrifuges, and dewatering systems.
   
• For reference, EPA’s 40 CFR Part 435 outlines effluent limits and covered waste streams for drilling and production, including produced water and produced sand requirements incorporated into NPDES permits that shape onsite solids control choices, which in turn is further complimenting the industry scenario.
   
• Declines in produced water discharges and improvements in re-injection rates reflect better process control, chemistry selection, and solids management. This creates a feedback loop, as performance improves, companies keep funding equipment upgrades and digital monitoring to sustain the gains. It’s also a reputational point demonstrable reductions help maintain social licenses and smooth approval paths for new wells and decom plans.
   
• For instance, in September 2024, Offshore Energies UK’s Environmental Insight reported a 9% reduction in produced water discharges, a 5% increase in re-injection, and a 15% reduction in dispersed oil within produced water on the UKCS in 2023, evidence tied to improved operations and waste handling.
   

Solid Control Drilling Waste Management Market Analysis

Learn more about the key segments shaping this market

Download Free PDF

• The solid control drilling waste management industry reported a revenue of USD 1.1 billion, USD 1.3 billion, USD 1.4 billion in the year 2023, 2024, and 2025 respectively. Operator ESG programs in various region including Middle East are scaling waste minimization and circular practices, boosting demand for solids control.
   
• National companies are embedding ISO-aligned environmental management systems, circular economy thinking, and offshore waste reduction technologies. For drilling waste, that translates into segregation at source, sterilization/reduction of volumes, and stronger reuse/recycling pathways.
   
• Rising intensities & matureness for these programs, vendors that deliver quantifiable volume and weight reductions, hygiene improvements, and documented compliance get pulled into framework agreements supporting sustained market growth for solids control and waste services.
   
• For instance, in 2023, the ADNOC sustainability report indicated that the company and its drilling detailed waste management initiatives, including offshore pilots that achieved nearly 80% volume and 45% weight reduction in treated non-hazardous waste, under ISO 14001-accredited EMS and broader sustainability programs. This is further anticipated to spur market growth down the line.
   
• OEMs have moved beyond basic shakers to integrated systems that enclose cuttings transfer, intensify drying, reclaim mud, and recycle water. The practical benefits, lower transport, fewer crane lifts, safer decks, and reduced disposal tonnage, align perfectly with operator cost and ESG priorities. As more rigs adopt these packages, solid control becomes a modular, data-rich platform rather than a set of standalone machines.
   
• This shift increases service depth and aftermarket opportunities across regions. For reference, SLB’s Cuttings Management and Recycling System (CMRS) and CLEANCUT enclosed collection/transport show company-backed solutions that reduce waste, conserve water, and improve safety by fully enclosing cuttings handling and maximizing mud recovery.
   
• Continuous adoption of reinjection solutions and thermal desorption are mainstreaming supporting zero-discharge objectives onshore and offshore. For sites where surface disposal is constrained, cuttings reinjection (CRI) and thermal treatment help operators meet permit obligations and corporate sustainability targets.
   
• CRI provides permanent subsurface isolation; thermal desorption recovers hydrocarbons and leaves inert solids. Both depend on robust upstream solids control to optimize flows and quality. As more permits cite these methods and operators standardize them, the demand pattern favors service firms with integrated capabilities from separation to treatment.
   
• Strategic plans at NOCs increasingly blend production targets with low-carbon and environmental programs, keeping drilling waste management on the investment agenda. In practical terms, that sustains budgets for solids control upgrades, onsite treatment, and digital tracking, especially in large multi-year offshore developments.
   
• Suppliers that align with these plans, demonstrate regulatory literacy, and quantify environmental benefits are best placed to win multi-asset contracts. For instance, Petrobras’ Business Plan 2025–2029 commits USD 111 billion and explicitly scales low-carbon initiatives, embedding environmental priorities into upstream investments.
   

Learn more about the key segments shaping this market

Download Free PDF

• Based on applications, the solid control drilling waste management market is segmented into onshore and offshore. The solid control across onshore industry held a market share of 62.1% in 2025 and will grow at a CAGR of 7.5% by 2035. Stricter venting/flaring controls and LDAR programs are cascading into better on-site solids control, thereby adding to the market growth.
   
• Across major onshore basins, tighter rules on methane waste and leak detection are indirectly elevating rig-site solids control. Operators demonstrate reduced waste and verify measurement, the easiest wins start at the source, finer cuttings separation, drier solids, and cleaner fluids that limit downstream handling and transportation.
   
• This compliance push is embedding routine instrumented monitoring around shakers, dryers, and centrifuges, with datasets that feed LDAR and waste reporting. As a result, onshore contractors are standardizing high-g shakers, vertical cuttings dryers, and dewatering trains to reduce mud loss, lower haul-offs, and support auditable environmental KPIs under evolving federal and state frameworks.
   
• For instance, in January 2025, CNOOC promoted exploration and development integration, as well as engineering standardization, to accelerate the conversion of reserves into production. This included Bozhong 26-6 Oilfield Development Project (Phase I) and Kenli 10-2 Oilfields Development Project (Phase I) in China, as well as Yellowtail Project in Guyana and Buzios7 Project in Brazil.
   
• Onshore waste facilities are being regulated for design, operations, monitoring, and closure, with explicit groundwater protection aims. This is resulting and also pushing rig crews to improve solids control (higher dryness, less oil-on-cuttings), install enclosed transfer systems, and adopt digital manifests.
   
• The offshore application will grow at a CAGR of 8.3% by 2035. Water stewardship offshore is shifting solids control toward fluid recovery and reuse, reducing slops and logistical burden. As Offshore logistics are costly, every cubic meter of waste fluid moved off the rig adds risk and emissions.
   
• Operators are prioritizing solids control designs that maximize mud recovery, prevent unnecessary flushes, and recycle water onboard. The result is smaller slops volumes, fewer backloads, and clearer compliance documentation. These systems also stabilize drilling performance, cleaner fluids reduce ECD and improve ROP creating a performance rationale that complements environmental goals.
   
• For instance, SLB’s CMRS explicitly targets water conservation by eliminating unnecessary flushes, optimizing fluid displacement, and maximizing wastewater recycling, while NOV’s offshore waste management portfolio highlights integrated drying, centrifugation, and storage that cut slopes and improve compliance.
   
• Offshore projects under targeted low-carbon strategies specify enclosed handling, onboard treatment, and measurable waste reduction. This alignment stabilizes demand for solids control services through full field-life cycles from exploration wells to platform drilling and abandonment owing to environmental performance is a stated deliverable.
   

Looking for region specific data?

Download Free PDF

• U.S. dominated the solid control drilling waste management market in North America with around 81% share in 2025 and generated USD 410 million revenue. In North America, solids control and drilling waste management are being re-optimized around evolving methane and flare compliance timelines.
   
• Operators are investing in higher-efficiency shakers and dryers, more reliable flare measurement (net heating value), and digital evidence trails around leak detection and waste volumes. Service providers with integrated solids control plus verifiable monitoring (continuous pilot flame alarms, enclosed vent systems, data logs) are better placed to support operators through staggered compliance dates without slipping on reporting quality.
   
• For instance, in November 2025, the U.S. EPA finalized action to extend several OOOOb/c compliance deadlines covering control devices, equipment leaks, storage vessels, process controllers, covers/closed-vent systems, and flare/enclosed combustion monitoring, explicitly citing the need for workable timelines and better documentation.
   
• The Europe solid control drilling waste management market will grow at a CAGR of 6.7% by 2035. The region’s offshore basins continue to couple emissions goals with waste minimization and decommissioning readiness tightening demand for high-performance solids control, onboard treatment, and transparent reporting.
   
• Moreover, regulators are pushing data-led stewardship, highlighting technologies (including flare gas recovery, enhanced monitoring) and well-construction practices that reduce environmental exposure across project lifecycles. Additionally, decommissioning momentum further raises expectations for cutting pile understanding, seabed impact minimization, and waste routing transparency.
   
• For instance, in November 2025, the North Sea Transition Authority (NSTA) issued Technology Insights 2025, highlighting deployment of emissions-reducing technologies (e.g., flare gas recovery and enhanced monitoring) and well-construction innovations, a signal to suppliers that waste-reducing, measurement-rich solutions are priority investments on the UKCS.
   
• The Asia Pacific solid control drilling waste management market will cross USD 400 million by 2035. APAC regulators are keeping offshore activity firmly tethered to accepted, project-specific Environment Plans that spell out how drilling, completions, interventions, and plug-and-abandonment will be managed to ALARP, including cuttings handling, flaring, and support-vessel impacts.
   
• Australia’s NOPSEMA pipeline, where EPs are opened for comment, assessed and then accepted, demands traceable planning and monitoring; operators consequently specify solids control packages that can hit compliance targets across multi-well programs and adverse weather windows.
   
• For instance, in May 2025, NOPSEMA accepted Esso’s Turrum Phase 3 Drilling Environment Plan, a development activity in Gippsland Basin detailing drilling, completions, ROV support and logistics, anchored in compliance with Australia’s Offshore Petroleum and Greenhouse Gas Storage (Environment) Regulations 2023.
   
• Middle East & Africa solid control drilling waste management market will grow at a CAGR of 8.2% by 2035, as national operators are scaling drilling fleets and integrated services while embedding ISO-aligned EMS and circular economy initiatives, boosting demand for solids control that demonstrably reduces volumes, recovers fluids, and improves safety (enclosed handling, fewer lifts).
   
• The market favors providers who can deliver quantifiable waste minimization, traceable environmental KPIs, and integration with broader ESG frameworks. Rapid program growth, including unconventional and offshore island operations, elevates the need for standardized packages (high-g shakers, dryers, centrifuges, enclosed conveying) tied to data capture and operational dashboards.
   
• For illustration, in July 2025, Aramco documented >300 circular economy initiatives implemented across business lines, reinforcing the corporate push to reduce, reuse, and recycle, principles that cascade to drilling waste streams and favor technologies that recover mud, reduce cuttings volume and avoid landfill routes.
   
• Latin America solid control drilling waste management market will expand at CAGR of 7.6% by 2035, owing to the region’s deepwater and pre-salt expansion coupled with sharpening regulatory agenda and enterprise-level waste goals. Brazil’s renewed licensing cycles and regulatory agenda create forward visibility on exploration and development while holding operators to environmental permitting and performance expectations making solids control central to permit compliance and operational continuity.
   
• For instance, in May 2025, Ecopetrol (Colombia) updated its Integrated Waste Management strategy reporting a 33% reduction in oil-based drilling cuttings vs. 2023 within total hazardous waste, aligning with circularity targets and operational excellence, an indicator of regional operator commitments that directly shape solids control choices.
   

Solid Control Drilling Waste Management Market Share

• The top 5 companies in solid control drilling waste management industry including Schlumberger, Halliburton, Baker Hughes, Weatherford, and TWMA held over 35% market share in the year 2024. TWMA is a leading specialist in offshore drilling waste management, renowned for its proprietary TCC RotoMill technology. The company dominates the onsite thermal desorption segment, enabling zero-discharge operations while significantly reducing carbon emissions.
   
• Clean Harbors stands as a major provider of hazardous waste disposal services in North America, including drilling waste treatment. Its extensive network of incineration and landfill facilities, complemented by mobile treatment units, supports oilfield operations across the U.S. and Canada. Strong regulatory expertise and robust infrastructure give the company a distinct competitive advantage.
   

Solid Control Drilling Waste Management Market Companies

Major players operating in the solid control drilling waste management industry are:
 

• Augean Plc
• Baker Hughes
• Clean Harbors, Inc.
• Derrick Equipment Company
• GN Solids Control
• Halliburton
• Imdex Limited
• Newpark Resources Inc.
• NOV Inc.
• Ridgeline Canada Inc.
• Schlumberger
• Secure Energy Services, Inc.
• Select Water Solutions
• Soli-Bond, Inc.
• TWMA
• Weatherford
• Ecoserv LLC
• Milestone Environmental Services
• Pure Environmental
• Tidal Logistics
• Environmental Development Company Ltd.
  
   
• Schlumberger, a U.S.-based oilfield services company, delivers comprehensive drilling waste management solutions through its Environmental Services division. Its offerings include solids control, cuttings treatment, and fluid recovery, with strong capabilities across both offshore and onshore operations. The company reported USD 8.9 billion in revenue for Q3 2025.
   
• Halliburton provides advanced drilling waste management services as part of its integrated drilling and completion portfolio. Known for its innovation in minimizing environmental impact, the company maintains a robust presence in North America, the Middle East, and Asia. Halliburton posted USD 5.6 billion in revenue for Q3 2025.
   
• Baker Hughes delivers waste management solutions through its Environmental Solutions portfolio, focusing on cuttings reinjection, fluid recovery, and thermal treatment technologies. Headquartered in the U.S., the company reported USD 7 billion in revenue for Q3 2025.
   

Solid Control Drilling Waste Management Industry News

• In October 2025, Oil and Natural Gas Corporation Limited (ONGC), a Government of India enterprise, has committed over USD 900 million to develop and produce oil and gas from 172 onshore wells across eight Petroleum Mining Lease blocks in Andhra Pradesh. This large-scale drilling program is expected to significantly boost drilling waste management activities in the region, driving market growth.
   
• In September 2025, Offshore Energies UK (OEUK) published Environmental Insight 2025, showing progress against North Sea Transition Deal targets (including methane and permitted discharges), and detailing volumes for produced water, dispersed oil, chemicals and drill cuttings, reinforcing the operational behaviors behind improved waste metrics.
   
• In May 2025, Brazil’s regulator ANP approved its Regulatory Agenda 2025–2026, outlining actions across exploration/production and environmental oversight, signaling continued regulatory engagement that underpins waste management standards and documentation across Brazilian operations.
   

This solid control drilling waste management market research report includes in-depth coverage of the industry with estimates & forecast in terms of revenue (USD Million) from 2022 to 2035, for the following segments:

Click here to Buy Section of this Report

Market, By Application

• Onshore
• Offshore

The above information has been provided for the following regions and countries:

• North America
  • U.S.
  • Canada 
• Europe
  • Germany
  • France
  • UK
  • Spain
  • Italy
• Asia Pacific
  • China
  • India
  • Japan
  • Australia
  • South Korea
• Middle East & Africa
  • Saudi Arabia
  • South Africa
  • UAE
• Latin America
  • Brazil
  • Argentina