Home > Industrial Machinery > Cold Milling Machine Market > Table of Contents

Cold Milling Machine Market - By Type (Crawler, Wheel), By Milling Width (Below 2ft, 2ft - 5ft, Above 5ft), By Application (Concrete Pavement, Asphalt Pavement) & Forecast, 2022-2030

  • Report ID: GMI5293
  • Published Date: Jul 2022
  • Report Format: PDF

Report Content

Chapter 1   Methodology & Scope

1.1    Scope & definitions

1.2    Methodology and forecast parameters

1.3    Region-wise COVID-19 impact analysis:

1.3.1    North America

1.3.2    Europe

1.3.3    Asia Pacific

1.3.4    Latin America

1.3.5    Middle East & Africa (MEA)

1.4    Data Sources

1.4.1    Secondary

1.4.2    Primary

1.5    Industry Glossary

Chapter 2   Executive Summary

2.1    Cold milling machine industry 3600 synopsis, 2018 - 2030

2.2    Business trends

2.3    Regional trends

2.4    Type trends

2.5    Milling width trends

2.6    Application trends

Chapter 3   Cold Milling Machine Industry Insights

3.1    Introduction

3.2    COVID-19 impact

3.2.1    Impact by region

3.2.1.1    North America

3.2.1.2    Europe

3.2.1.3    Asia Pacific

3.2.1.4    Latin America

3.2.1.5    MEA

3.2.2    Impact on the value chain

3.2.3    Impact on the competitive landscape

3.3    Russia-Ukraine war impact

3.3.1    Response of global enterprises

3.4    Cold milling machine industry ecosystem analysis

3.4.1    Raw material and component suppliers

3.4.2    Technology providers

3.4.3    Manufacturers

3.4.4    Distributors

3.4.5    End-users

3.4.6    Vendor matrix

3.5    Technology and innovation landscape

3.5.1    IoT & telematics

3.5.2    3D modeling

3.6    Regulatory landscape

3.6.1    International standards

3.6.1.1    ISO 15645:2018

3.6.1.2    ISO 22242:2005

3.6.1.3    OSHA 29 CFR 1926.21

3.6.2    North America

3.6.2.1    Environmental Protection Agency (EPA)

3.6.2.2    Federal Information Processing Standards (FIPS)

3.6.2.3    The American Society of Mechanical Engineers (ASME)

3.6.3    Europe

3.6.3.1    General Data Protection Regulation (GDPR)

3.6.3.2    French Data Protection Authority's (CNIL)

3.6.3.3    Committee for European Construction Equipment (CECE)

3.6.3.4    Directive 89/686/EEC (Personal Protective Equipment)

3.6.3.5    European Emission Standards

3.6.4    Asia Pacific

3.6.4.1    Department of Heavy Industry

3.6.4.2    Personal Information Protection Act (Act No. 14839) (“PIPA”)

3.6.4.3    3. ICEMA - Indian Construction Equipment Manufacturers’ Association

3.6.5    Latin America

3.6.5.1    Law 13.709 Brazil

3.6.5.2    Chilean Construction Chamber (CChC)

3.6.5.3    Brazil Emission Standards

3.6.5.4    NR18-Working Conditions and Environment in Construction Industry (PCMAT)

3.6.6    MEA

3.6.6.1    Essential Cybersecurity Controls (ECC)

3.6.6.2    UAE Restriction of Hazardous Substances (RoHS)

3.6.6.3    Botswana SIIR

3.7    Industry impact forces

3.7.1    Growth drivers

3.7.1.1    Global

3.7.1.1.1    Proliferation of technologically advanced cold milling machinery

3.7.1.2    North America and Europe

3.7.1.2.1    Growing infrastructural expansion plans in various sectors

3.7.1.3    Asia Pacific

3.7.1.3.1    Rising smart city projects in the region

3.7.1.4    Latin America

3.7.1.4.1    Increasing urbanization leading to a surge in construction activities

3.7.1.5    MEA

3.7.1.5.1    Growing investments in road construction projects for better transportation

3.7.2    Industry pitfalls & challenges

3.7.2.1    High ownership costs

3.7.2.2    Limited availability of qualified and skilled equipment operators

3.8    Investment portfolio

3.9    Growth potential analysis

3.10    Porter's analysis

3.10.1    Supplier power

3.10.2    Buyer power

3.10.3    Threat of new entrants

3.10.4    Threat of substitutes

3.10.5    Internal rivalry

3.11    PESTEL analysis

3.11.1    Political

3.11.2    Economic

3.11.3    Social

3.11.4    Technology

3.11.5    Environment

3.11.6    Legal

Chapter 4   Competitive Landscape, 2021

4.1    Introduction

4.2    Company market share, 2021

4.3    Competitive analysis of prominent market players

4.3.1    Wirtgen Group

4.3.2    Caterpillar, Inc.

4.3.3    LiuGong Machinery Co., Ltd.

4.3.4    FAYAT Group (Bomag AG & Dynapac)

4.3.5    Sakai Heavy Industries, Ltd.

4.4    Vendor adoption matrix

Chapter 5   Cold Milling Machine Market, By Type

5.1    Cold milling machine market share, by type, 2021 & 2030

5.2    Crawler cold milling machine

5.2.1    Market estimates & forecast, 2018-2030

5.3    Wheel cold milling machine

5.3.1    Market estimates & forecast, 2018-2030

Chapter 6   Cold Milling Machine Market, By Milling Width

6.1    Cold milling machine market share, by milling width, 2021 & 2030

6.2    Below 2 ft

6.2.1    Market estimates & forecast, 2018-2030

6.3    2 ft – 5 ft

6.3.1    Market estimates & forecast, 2018-2030

6.4    Above 5 ft

6.4.1    Market estimates & forecast, 2018-2030

Chapter 7   Cold Milling Machine Market, By Application

7.1    Cold milling machine market share, by application, 2021 & 2030

7.2    Concrete pavement

7.2.1    Market estimates & forecast, 2018-2030

7.3    Asphalt pavement

7.3.1    Market estimates & forecast, 2018-2030

Chapter 8   Cold Milling Machine Market, By Region

8.1    Cold milling machine market share, by region, 2021 & 2030

8.2    North America

8.2.1    Market estimates & forecast, by type, 2018-2030

8.2.2    Market estimates & forecast, by milling width, 2018-2030

8.2.3    Market estimates & forecast, by application, 2018-2030

8.2.4    U.S.

8.2.4.1    Market estimates & forecast, by type, 2018-2030

8.2.4.2    Market estimates & forecast, by milling width, 2018-2030

8.2.4.3    Market estimates & forecast, by application, 2018-2030

8.2.5    Canada

8.2.5.1    Market estimates & forecast, by type, 2018-2030

8.2.5.2    Market estimates & forecast, by milling width, 2018-2030

8.2.5.3    Market estimates & forecast, by application, 2018-2030

8.3    Europe

8.3.1    Market estimates & forecast, by type, 2018-2030

8.3.2    Market estimates & forecast, by milling width, 2018-2030

8.3.3    Market estimates & forecast, by application, 2018-2030

8.3.4    UK

8.3.4.1    Market estimates & forecast, by type, 2018-2030

8.3.4.2    Market estimates & forecast, by milling width, 2018-2030

8.3.4.3    Market estimates & forecast, by application, 2018-2030

8.3.5    Germany

8.3.5.1    Market estimates & forecast, by type, 2018-2030

8.3.5.2    Market estimates & forecast, by milling width, 2018-2030

8.3.5.3    Market estimates & forecast, by application, 2018-2030

8.3.6    France

8.3.6.1    Market estimates & forecast, by type, 2018-2030

8.3.6.2    Market estimates & forecast, by milling width, 2018-2030

8.3.6.3    Market estimates & forecast, by application, 2018-2030

8.3.7    Italy

8.3.7.1    Market estimates & forecast, by type, 2018-2030

8.3.7.2    Market estimates & forecast, by milling width, 2018-2030

8.3.7.3    Market estimates & forecast, by application, 2018-2030

8.3.8    Russia

8.3.8.1    Market estimates & forecast, by type, 2018-2030

8.3.8.2    Market estimates & forecast, by milling width, 2018-2030

8.3.8.3    Market estimates & forecast, by application, 2018-2030

8.4    Asia Pacific

8.4.1    Market estimates & forecast, by type, 2018-2030

8.4.2    Market estimates & forecast, by milling width, 2018-2030

8.4.3    Market estimates & forecast, by application, 2018-2030

8.4.4    China

8.4.4.1    Market estimates & forecast, by type, 2018-2030

8.4.4.2    Market estimates & forecast, by milling width, 2018-2030

8.4.4.3    Market estimates & forecast, by application, 2018-2030

8.4.5    India

8.4.5.1    Market estimates & forecast, by type, 2018-2030

8.4.5.2    Market estimates & forecast, by milling width, 2018-2030

8.4.5.3    Market estimates & forecast, by application, 2018-2030

8.4.6    Japan

8.4.6.1    Market estimates & forecast, by type, 2018-2030

8.4.6.2    Market estimates & forecast, by milling width, 2018-2030

8.4.6.3    Market estimates & forecast, by application, 2018-2030

8.4.7    South Korea

8.4.7.1    Market estimates & forecast, by type, 2018-2030

8.4.7.2    Market estimates & forecast, by milling width, 2018-2030

8.4.7.3    Market estimates & forecast, by application, 2018-2030

8.5    Latin America

8.5.1    Market estimates & forecast, by type, 2018-2030

8.5.2    Market estimates & forecast, by milling width, 2018-2030

8.5.3    Market estimates & forecast, by application, 2018-2030

8.5.4    Brazil

8.5.4.1    Market estimates & forecast, by type, 2018-2030

8.5.4.2    Market estimates & forecast, by milling width, 2018-2030

8.5.4.3    Market estimates & forecast, by application, 2018-2030

8.5.5    Mexico

8.5.5.1    Market estimates & forecast, by type, 2018-2030

8.5.5.2    Market estimates & forecast, by milling width, 2018-2030

8.5.5.3    Market estimates & forecast, by application, 2018-2030

8.6    MEA

8.6.1    Market estimates & forecast, by type, 2018-2030

8.6.2    Market estimates & forecast, by milling width, 2018-2030

8.6.3    Market estimates & forecast, by application, 2018-2030

8.6.4    UAE

8.6.4.1    Market estimates & forecast, by type, 2018-2030

8.6.4.2    Market estimates & forecast, by milling width, 2018-2030

8.6.4.3    Market estimates & forecast, by application, 2018-2030

8.6.5    Saudi Arabia

8.6.5.1    Market estimates & forecast, by type, 2018-2030

8.6.5.2    Market estimates & forecast, by milling width, 2018-2030

8.6.5.3    Market estimates & forecast, by application, 2018-2030

8.6.6    South Africa

8.6.6.1    Market estimates & forecast, by type, 2018-2030

8.6.6.2    Market estimates & forecast, by milling width, 2018-2030

8.6.6.3    Market estimates & forecast, by application, 2018-2030

Chapter 9   Company Profiles

9.1    Aztec Industries, Inc.

9.1.1    Business overview

9.1.2    Financial data

9.1.3    Product landscape

9.1.4    Go-to-market strategy

9.1.5    SWOT analysis

9.2    Bomag GmbH

9.2.1    Business overview

9.2.2    Financial data

9.2.3    Product landscape

9.2.4    Go-to-market strategy

9.2.5    SWOT analysis

9.3    Caterpillar, Inc.

9.3.1    Business overview

9.3.2    Financial data

9.3.3    Product landscape

9.3.4    Go-to-market strategies

9.3.5    SWOT analysis

9.4    CMI Roadbuilding Limited

9.4.1    Business overview

9.4.2    Financial data

9.4.3    Product landscape

9.4.4    Go-to-market strategy

9.4.5    SWOT analysis

9.5    Liugong Machinery Co., Ltd.

9.5.1    Business overview

9.5.2    Financial data

9.5.3    Product landscape

9.5.4    Go-to-market strategy

9.5.5    SWOT analysis

9.6    Sakai Heavy Industries, Ltd.

9.6.1    Business overview

9.6.2    Financial data

9.6.3    Product landscape

9.6.4    Go-to-market strategy

9.6.5    SWOT analysis

9.7    Sany Group

9.7.1    Business overview

9.7.2    Financial data

9.7.3    Product landscape

9.7.4    Go-To-Market Strategy

9.7.5    SWOT analysis

9.8    Shantui Construction Machinery Co., Ltd.

9.8.1    Business overview

9.8.2    Financial data

9.8.3    Product landscape

9.8.4    Go-to-market strategy

9.8.5    SWOT analysis

9.9    Wirtgen Group

9.9.1    Business overview

9.9.2    Financial data

9.9.3    Product landscape

9.9.4    Go-to-market strategy

9.9.5    SWOT analysis

9.10    XCMG Group (Xuzhou Construction Machinery Group Co., Ltd.)

9.10.1    Business overview

9.10.2    Financial data

9.10.3    Product landscape

9.10.4    Go-to-market strategy

9.10.5    SWOT analysis
 

Authors: Preeti Wadhwani

Buy Now

Immediate Delivery Available

Premium Report Details

  • Base Year: 2021
  • Companies covered: 10
  • Tables & Figures: 313
  • Countries covered: 16
  • Pages: 230
 Download Free Sample